A Terra Cane Sideboard | Plum
Home project
A Terra Cane Sideboard
Red 01 - Terra |
€1,287
Personalise
Samples
Terra, cane and brass, the three essentials to create this warm sideboard that will brighten up your home. Entrance hall, living room, your little one's bedroom. This versatile piece of furniture can dress up any room. Its advantage? The plinths set back from the edge of the cabinet, which create an airy, almost floating effect.
Find below all the details of this project.
Home project
A Terra Cane Sideboard
Red 01 - Terra |
€1,287
Personalise
Samples
Terra, cane and brass, the three essentials to create this warm sideboard that will brighten up your home. Entrance hall, living room, your little one's bedroom. This versatile piece of furniture can dress up any room. Its advantage? The plinths set back from the edge of the cabinet, which create an airy, almost floating effect.
Find below all the details of this project.
Shopping List
|
At Ikea
|
€185
|
|
|
2 x Wall cabinet frame
Ikea ref. 10205534 |
€50 |
|
1 x Wall cabinet frame
Ikea ref. 60205522 |
€33 |
|
3 x Hinge
Ikea ref. 20204647 |
€27 |
|
3 x Drawer low
Ikea ref. 50285029 |
€63 |
|
3 x Leg
Ikea ref. 40205599 |
€12 |
|
At Plum
|
€1,287
|
|
|
1 x Door 40x60cm
Straight design, Matte lacquered, Red 01 - Terra |
€89.00 |
|
2 x Door 40x60cm
Classic cane design, Painted Oak, Red 01 - Terra |
€414.00 |
|
3 x Drawer 40x20cm
Straight design, Matte lacquered, Red 01 - Terra |
€162.00 |
|
2 x Cover panel 39x60cm
Straight design, Matte lacquered, Red 01 - Terra |
€132.00 |
|
1 x Cover panel 39x163cm
Straight design, Matte lacquered, Red 01 - Terra |
€176.00 |
|
1 x Plinth 220x8cm
Straight design, Brass, Brass |
€110.00 |
|
6 x Handle
Brass, Delta |
€204.00 |
|
Total
|
€1,472
|
Create my Plum basket
Some practical information
- Doors: Our doors are pre-drilled to fit the Metod cabinet frames.
- Hinges: 2 Utrusta hinges (to be purchased from Ikea) per Plum door.
- Drawers: Our drawer fronts are pre-drilled to fit Ikea Maximera drawer rails only.
- Sides: The cover panels that cover the sides and top of the cabinet are screwed on from the inside, using 25-30mm screws. The side panels will not be necessary if your furniture is placed against a wall.
- Cutting: For this project, only the plinths will need to be cut to make the side returns.
